No cheap parts givaways here to get you to buy Tapetech Tools. We are one of only a handful of authorized service centers to give you discounted rates on service and genuine parts and kits if you buy from Drywall Zone inc. Only genuine parts and kits not cheap seals,bearings and screws and cheap junk parts as a free givaway, we record your serial # and when you call or send in tools to us or order again, we discount and make you a priority, no one else can do this on a Tapetech tool...

Operation

With its two nozzles, the EasyClean® Pump fills nail spotters, automatic tapers, flat boxes, corner applicators, and MudRunner.TM

The filler attachment is secured to the EasyClean® Pump by aligning the slots of the filler over the studs on the EasyClean® Pump housing and tightening the two hex nuts. The gasket should be placed between the EasyClean® Pump and the filler, before tightening nuts, to prevent leakage.

Place the EasyClean® Pump in a standard five gallon pail, making sure the joint compound is well mixed and lump free. A new or fresh EasyClean® Pump should be primed before use by pouring 1/2 cup of water into the outlet. Once the EasyClean® Pump is full joint com-pound, no further priming is needed.

Maintenance

The EasyClean® Pump can be disassembled by disengaging the two clasps at the top of the EasyClean® Pump and pulling the barrel away from the main EasyClean® Pump body. The plunger can then be removed by disengaging the quick release pin and sliding the plunger through the EasyClean® Pump housing.

The EasyClean® Pump can now be cleaned by using a water hose or water and a brush to remove the joint compound from the EasyClean® Pump housing and plunger. Then, after the tool is clean, lightly oil with Ames® Bazooka® Oil or any light machine oil. To keep your EasyClean® Pump in top working order, you may need to replace the screen, gasket or 0-ring Ofl your EasyClean® Pump. These items should be checked when you clean your EasyClean® Pump.